KRODOSEN
Products01 Technology02 About03 $905$9 $906$9
/
Request a quote
Technology

Manufacturing technology

Industrial connectors and semiconductor chips are built on the same discipline: micrometre-level tolerances, controlled materials and 100 % test. That discipline is what keeps performance identical from the first unit to the millionth.

Home/Technology
Process

From copper strip and wafer to qualified part

Connector and semiconductor lines both run five controlled stages, with inspection between every step.

STEP 01
Terminal stamping

High-conductivity copper alloy — phosphor bronze and beryllium copper — is stamped to ±0.02 mm and selectively plated.

STEP 02
Housing moulding

LCP and PA9T high-temperature engineering plastics are insert-moulded around the terminals to form the sealed body.

STEP 03
Wafer fabrication

Photolithography, ion implantation and thin-film deposition build the die on 6- and 8-inch wafers.

STEP 04
Assembly & test

Wire bonding or flip-chip, moulding, then 100 % electrical and visual inspection before packing.

STEP 05
Qualification

Thermal cycling −55 to +150 °C, 96 h salt spray, mating-cycle life, vibration and IP67 leak test.

Quality

Quality is a measurable output

Our quality system is audited by automotive tier-one customers and covers incoming material, in-process control and finished-goods reliability testing.

ISO 9001

Quality management system across all manufacturing sites.

01

IATF 16949

Automotive quality management for the connector and semiconductor lines.

02

ISO 14001

Environmental management, including waste and emissions control.

03

AEC-Q100

Automotive qualification for the semiconductor lines.

04
Reliability

Test coverage per lot

Tested to EIA-364 and AEC-Q100 / JEDEC methods. Reports available with every shipment on request.

Send an enquiry
Contact resistance
Dielectric withstanding voltage
Insulation resistance
Mating cycles
Salt spray 96 h
Thermal shock −55 / +150 °C
Vibration & mechanical shock
IP67 sealing
Contact

Looking for a specific part number?

Send us your BOM and we will reply with availability, cross references and lead time within one business day.